After your pool installation in Salt Lake City, using your pool cover the right way will protect your investment. As you need regular swimming pool maintenance , your cover will also need some special attention now and then to ensure that it stays in good condition and protects your pool properly. If you have a sold pool cover, follow these steps to care for it.
Spot Check Your Water Line
Your water line is important to more than your skimming system. If there is heavy debris on the surface of your solid cover, such as snow, water from heavy rains, or limbs, and the water line is so low that it doesn’t support your cover from underneath, then your pool cover can become damaged or wear out sooner than it otherwise would. When your pool is not in use for long periods of time, periodically perform water level checks to prevent excessive stain on your pool cover.
Prevent Chemical Damage
The chemicals you put in your pool to keep the water clean and balanced could cause damage to your pool cover. When you add chemicals, avoid putting the cover on for at least two hours. This will allow the chemicals to dissolve in the water and the levels to balance out. If you put your pool cover on right after treating your water, the chemicals could still be sitting on the surface of the water and damage the pool cover.
Clean Your Pool Cover
Your pool cover should be cleaned about once every three to six months. Use mild dish soap and a hose to wet the surface, and then scrub it with a pool brush. Rinse the soap off and use a cover pump on the liner to get rid any water that accumulates. If you notice any mold growth, wash the affected area with diluted bleach, being sure to rinse it off completely. You can reduce the chances of mold growth by making sure your cover is dry before storing it.
Swimming pool companies in Salt Lake City recommend backwashing the sand filter about every week, or more frequently if your pool gets a great deal of use. Ideally, you should do this pool maintenance task right after you vacuum your pool. Watch this quick video for a demonstration of the proper way to backwash a sand filter.
This pool maintenance expert directs viewers to turn off the sand filter, and then affix the backwash hose to the backwash nozzle. Screw on a hose clamp, and adjust the multiport valve from the filter setting to the backwash setting. It should run for about a minute. Then, you’ll adjust the setting to rinse, and finally turn the setting to filter. Once you’ve completed these steps, your lap pool is ready for use again.
While a new swimming pool installation serving Salt Lake City can make a huge impact on your space, some people forget to consider the maintenance it takes to keep an in-ground pool up and running. If you don’t think you’ll be able to adequately maintain your pool, that doesn’t mean that you can’t have one. If you work with professionals, you can expect to enjoy your pool as frequently as you would like during the warmer months. Continue and learn about some of the reasons you should call a professional pool service.
If you’re unsure of whether you’ll be able to maintain your pool on your own, it helps to work with the experts. Your swimming pool professionals will make sure your chemicals are balanced, troubleshoot your filter, and help keep your pool nice and clean. What’s even better is that the specialists can offer more than just maintenance. They can also diagnose problems with your pool, your equipment, and your water. Whether your water is cloudy, your pump is making abnormal sounds, or dirt is building up on your liner, call your professional pool service to take care of the problem.
A new swimming pool installation can be attainable, even if you have a small backyard. In this video, you will take a look at some terrific swimming pool installation ideas for smaller backyards. With services from a pool contractor in Salt Lake City , you will be able to create a backyard pool that is the perfect size and shape for your property. Waterfalls, hot tubs, and other design features can bring your small swimming pool to life.
When you start to plan out your swimming pool installation with your pool builders, you will have the option of creating a freeform design for your pool area. Unlike traditional swimming pools, which contain rigid, geometric shapes, freeform pools have an organic look and feel. A builder that has plenty of experience with pool installation in Salt Lake City will be able to help you plan out a freeform pool that matches beautifully with your backyard.
There are a few terrific benefits to freeform swimming pool installation. When you create a freeform pool, you will be able to create a one-of-a-kind design for your backyard. Small pools are particularly suited to freeform design, as they can be crafted to look like natural water elements . You may also find that your swimming pool maintenance requirements are lower when you create a freeform design. Overall, planning a freeform pool will allow you to express your personality and sense of style.
Have you scheduled swimming pool installation in Salt Lake City? If so, it’s time to get ready for summertime fun for years to come. You know that you’ll have to be prepared to complete pool maintenance and cleaning on a regular basis, but you may also be wondering what to expect during pool construction. Continue reading for an overview of the swimming pool installation process.
Designing the Layout
First, you will need to meet with your pool contractor to choose a pool shape. The pool installer will need to see your yard to determine what pool shape will work best there. Once your swimming pool has been designed, it will be staked out in the ground so that the pool installers will know exactly where to begin construction.
Excavating, Plumbing, and Installing Electrical Components
Professional pool contractors will be able to safely excavate the area where your swimming pool will eventually be. This process will involve digging up and removing the dirt, rock, and debris from the area. Once this is complete, plumbing pipes will be run to the pool area, along with electrical lines to power the pool equipment.
Framing and Hardscaping
Your pool installation team will use steel rebar to construct the framework for your swimming pool. This strong material will help to ensure that your pool remains safe to use for years to come. Concrete will then be placed in the frame, and your swimming pool structure will be carefully smoothed and sculpted. As your swimming pool structure cures, hardscaping such as walkways, patios, and even an outdoor fireplace can be built around the pool.
Finishing the Interior
The final step of pool construction is to finish the interior of your swimming pool. Tile will be installed where the waterline will sit, and the swimming pool finish will be applied throughout the rest of the pool. Plaster, aggregate, and glass tile are some of the finish options that you can choose for your new swimming pool. Next, the pool equipment will be installed, and your new pool will be filled with water. The final step will be to balance the chemistry of the water.
There is more to the process of closing your inground pool than buying the right pool cover in Salt Lake City. Even for small pools, it helps to enlist the services of a professional swimming pool contractor for assistance. Check out this video clip for a look at the process of closing your inground pool for winter.
The first step in preparing to close up your swimming pool for the winter is to make sure it’s as clean as possible. This includes all of the typical pool maintenance tasks like skimming and vacuuming. Make sure your chemicals are balanced, and then have your pool contractor help you blow out the lines; professional assistance is especially helpful if you have a pool heater or a fountain feature. Finally, add your winter chemicals into your water and use a quality winter pool cover to close it up for the winter.
While you can perform routine pool maintenance on your own, you should use a reputable swimming pool company for more complex swimming pool services in Salt Lake City . A swimming pool maintenance expert will know exactly how to winterize and close your pool in the winter so that it remains safe when not in use. He will also be able to assist you in opening your in-ground pool or saltwater pool for use in the spring or summer.
If you attempt to perform more complex pool maintenance or pool services on your own, you risk swimming in an in-ground pool that is unsafe for use. You also may not have the equipment or expertise to detect problems with your in-ground pool, such as a faulty pool heater or pump, clogged filters, small pool leaks, or unstable chemical levels. A pool maintenance expert can detect problems quickly, before they turn into more dangerous problems and require costly swimming pool services.
Regular swimming pool maintenance is also time-consuming, and an expert can save you time and money by correctly and effectively performing pool maintenance. You also won’t need to purchase or store the equipment and chemicals necessary for specialized swimming pool services.
Adding a fire element to your backyard can add beauty and interest to your pool area. Outdoor fire pits and outdoor fireplace in Salt Lake City are popular choices for families who want to enjoy their backyard year-round instead of only during the summer months.
Outdoor fire elements provide light, warmth and functionality to your deck or yard. Outdoor kitchens, ovens, and barbecues make it easy to spend more of your family time outside where you can cook and relax together. These fire elements are a great option if you enjoy being in your yard as much as possible, or if you frequently host backyard get-togethers.
Deep Blue Pools and Spas serves the Salt Lake City area as a hot tub installation provider and pool contractor. We’ve been in business for over 15 years and are proud to be an A rated company by the Better Business Bureau. The professionals at Deep Blue Pools and Spas can help you plan your backyard pool and hot tub installation.
Getting a pool installation done is a fantastic way to take advantage of your backyard. However, in order to properly maintain in ground pools near Salt Lake City, you need to fully understand how a swimming pool works . Watch this video to get a better sense of the different parts that help to keep a swimming pool operational.
Knowing how the skimmer, pump, filter, and pool heater operate is essential for any pool owner. You don’t necessarily need to know every single detail about them, but you should have a general idea of what they each do and how they work together. This will help you to keep your pool clean once your pool installation is finished. It will make swimming pool maintenance much easier and allow you to enjoy your new addition instead of stressing out about it.
- Hot Tub Installation
- Swimming Pool Installations
- Swimming Pool Design
- In Ground Pools
- Swimming Pool Maintenance
- Swimming Pool Service
- Swimming Pool Repair
- Outdoor Fireplace
- Outdoor Fire Pit
- Pool Safety
- Deep Blue Pools and Spas
- Outdoor Kitchen
- Pool Chemicals
- Chlorine Levels
- Water Feature
- Burning Calories
- Pool Contractor