Your indoor swimming pool near Salt Lake City relies on a delicate balance of chemicals that will keep the water clean, healthy, and comfortable for swimming. Once you’ve finished up the pool installation process, you’ll need to be able to tell how balanced the chemicals in your water are. Watch this video for some tips on using pool test strips.
Part of swimming pool maintenance is testing the chemical levels to make sure they’re in balance. You can do this using pool test strips. Your test strip will have a couple of readers for different chemicals, and you can match them up against the chart on the back of the container to see if they are in the safe range. Dip your entire test strip under the water for a couple of seconds, compare it to the chart, and then adjust your levels accordingly to enjoy a safe, healthy, and clean pool.
For many people, it’s tough to beat relaxing in the pool on a summer day. When pests decide to take over your pool, however, it can be hard to relax. Regular pool maintenance near Salt Lake City keeps your water clean, healthy, and refreshing, but how do you keep bugs out? Make sure you use a pool cover during the offseason so you don’t create a breeding ground for pest problems, do away with places pests can hide, and think about putting up a fence around your in-ground pool. Read ahead for details on these helpful tips.
Use a Pool Cover
When you close your pool up for the season, you might forget about it altogether until the warm weather rolls around again. If you want to make sure that pests don’t make themselves at home in your pool, it’s a good idea to close it up with a cover. Pool covers will seal out insects, rodents, and other pests that might otherwise set up habitats and start families in or around your pool. A cover can help, but you need to find one that fits your pool and install it properly.
Get Rid of Hiding Spots
Pool covers can be helpful, but they’re typically only used during the offseason. When there’s still plenty of time before you close yours up for the year, you’ll need to take additional steps to keep pests away. When you’re going through your swimming pool maintenance routine, make sure to keep an eye out for places where pests might be hiding. Bushes and growth around your pool can serve as habitats for pests and make it easy for them to spread into your pool, so get rid of these potential hiding spots.
Install a Fence
Pool fences can help keep children and pets safe, and they can also keep pests away from your swimming pool. Look for a fencing style that will do an adequate job of keeping small critters away—wood and vinyl fences may be ideal materials for a job like this. Choose a fence that doesn’t leave any room to sneak by.
A hot tub in your backyard will provide you with a wonderful space to wind down and relax after a long day. When you schedule a hot tub installation for your home in Salt Lake City, it is important to remember that hot tubs and small pools require the same level of maintenance as large, inground pools. The pool contractor who performed your hot tub installation will be able to help you maintain your unit throughout the years and seasons. Let’s look at three maintenance factors that every hot tub owner needs to keep in mind.
One of the most important factors that you will need to consider when you are maintaining your hot tub is how you will sanitize your water. In order for your hot tub to remain fresh and sanitary, it will need to be cleaned on a regular basis. If you do not have time to deeply sanitize your hot tub every month, you can hire a hot tub contractor to perform this service on your behalf.
Achieving the right balance of chemicals in your hot tub water will ensure that you have an enjoyable experience every time you take a dip. If you currently own a swimming pool, you will be familiar with the process of testing and adjusting your water. A hot tub maintenance company can provide you with testing kits that will allow you to easily achieve the right balance of chemicals in your hot tub.
The water in a hot tub is designed to remain at a consistently high temperature. If you allow your hot tub to cool down between uses, you may find that your unit starts to experience maintenance issues. In the wintertime, unheated water can even freeze over and crack. To keep your water at the correct temperature for your hot tub, you can use the dials or controls that are located on its side.
As a parent, it is your job to make sure that your children are properly supervised whenever they use your backyard pool. In this video, you will learn some essential pool safety tips for kids and their parents. To ensure that there is a designated adult supervisor, you can make a badge that is easy to identify. A pool contractor in Salt Lake City can help you construct a pool safety fence to add additional security to your pool space.
From pool slides to pool covers, your pool contractor will be able to provide you with all of the features and equipment that you need to create a fun and safe environment around your pool. If you are dreaming of hosting a pool party in your backyard this summer, now is a terrific time to schedule a consultation for your swimming pool installation.
A new swimming pool installation will provide you and your loved ones with plenty of fantastic outdoor recreational opportunities during the upcoming summer season. If you are getting ready for a new swimming pool installation for your property, you will want to hire a highly rated swimming pool company near Salt Lake City. From installing your pool to performing routine swimming pool maintenance, your contractors can assist you with every aspect of pool ownership. To help you get started on your pool or hot tub installation project, here is a quick look at a pool design and construction checklist.
During the initial phases of the pool planning process, you will need to gather plenty of design inspiration for your brand new swimming pool. Rather than designing your pool from scratch, you can look at landscaping websites, home design magazines, and other sources for ideas and inspiration. You may even want to consider creating a notebook to gather all of the pool features and materials that you want to include in your new pool.
Write Down Your Must-Haves
As you are designing a new pool construction, you will want to make sure that you clearly communicate your desires to your pool contractors. Before the pool building process begins, you can write down a list of the must-have features that you want to include in your new pool. Some popular features include waterfalls, fountains, LED lights and tanning shelves. These features will transform an ordinary pool into a gorgeous backyard oasis.
Consider Your Layout
No pool design and construction checklist would be complete without a thoroughly considered layout and blueprint design. The layout of your swimming pool will depend greatly on the size and shape of your backyard. To determine the ideal shape and orientation of your pool, you can use a rope or gardening hose to physically mark off your desired pool area. Once you have seen the layout of your pool in person, you will have a better idea of what it will look like when it is completed.
Hosting a pool party is a great way to celebrate your new pool installation near Salt Lake City . When you watch this video, you will receive some essential tips and tricks for planning a pool party that your family and friends will remember. Some important supplies to gather for your pool party include tasty finger foods, refreshing drinks, and a signature cocktail. For safety purposes, you should always use unbreakable dishes and cups around your fresh water or salt water pool.
If you have been dreaming of hosting a memorable pool party in your backyard, a pool contractor can help make your dreams into a reality. After your professional pool and hot tub installation, you will be ready to invite guests over to take a dip in your private swimming pool.
When you take a dip in your pool this spring, the last thing that you will want to see is cloudy water filling up your pool. Luckily, with a few routine pool maintenance procedures, you will be able to keep your pool water clean and clear at all times. A pool contractor that offers swimming pool maintenance near Salt Lake City will be there to answer any questions that you may have about how to keep your pool water clear. To help you determine what types of cleaning supplies you will need to purchase from your swimming pool company, let’s review some common causes of cloudy pool water.
Your outdoor swimming pool is surrounded by items and materials that can cause cloudiness in the water. Some examples of substances that can cloud up your pool water include tree pollen, construction debris, and even unusual weather patterns. If you determine that your pool water cloudiness is being caused by environmental factors, you may need to purchase a swimming pool cover to protect your water from contamination.
Broken Pool Filter
Your pool filter’s job is to remove algae, leaves, and other types of debris from the water in your pool. In the event that your pool filter breaks down, you may find that your pool water starts to look foggy or clouded. A pool maintenance technician will have the tools and knowledge needed to fix your broken pool filter and remove any clogs that might be jamming up its internal systems.
Excessive Pool Chemicals
While pool chemicals are necessary to keep your water clean, clear, and sanitary, using too many chemicals in your pool could result in cloudy water. If your water is too acidic, too alkaline, or filled with too much calcium, it might start to have a milky or cloudy appearance. To avoid problems related to swimming pool chemistry, you can use a pool chemical testing kit to achieve the right balance. If using a testing kit does not help you clear up your cloudiness issue, you might be in need of professional maintenance services.
When you start to plan out your swimming pool installation with your pool builders, you will have the option of creating a freeform design for your pool area. Unlike traditional swimming pools, which contain rigid, geometric shapes, freeform pools have an organic look and feel. A builder that has plenty of experience with pool installation in Salt Lake City will be able to help you plan out a freeform pool that matches beautifully with your backyard.
There are a few terrific benefits to freeform swimming pool installation. When you create a freeform pool, you will be able to create a one-of-a-kind design for your backyard. Small pools are particularly suited to freeform design, as they can be crafted to look like natural water elements . You may also find that your swimming pool maintenance requirements are lower when you create a freeform design. Overall, planning a freeform pool will allow you to express your personality and sense of style.
A new swimming pool installation is exciting for any family. When you hire a pool contractor in Salt Lake City to install a brand new pool for your home, it is a great idea to get to know the various features and components of your new pool. By educating yourself about the basics of swimming pool maintenance, you can make sure that your pool remains in terrific condition for all of your swimming and recreational needs. To help you talk to your swimming pool builders, here is a look at what every new pool owner needs to know about their pool.
Circulation is a key function for any swimming pool. If you neglect to keep your swimming pool’s circulation system in good working order, you may start to find that your water becomes green and filled with uninviting algae. The pool pump and filter are responsible for circulating water throughout your pool system. At regular intervals, you will need to clean out the pool filter to keep it in peak operating condition.
Learning About Cleaning
As the owner of a residential swimming pool, it is your job to make sure that you practice proper pool hygiene. All pools need to be cleaned on a weekly basis. In order to clean your pool, you can use a pool vacuum, skimmer, or brush system. To reduce the time that it takes to clean their pools, some pool owners choose to clean their pool water using automated vacuum systems.
Finding the Right Chemistry
Your pool’s chemistry will keep bacteria and other unwanted pathogens out of your pool water. If you have a conventional, rather than a saltwater pool, you will need to make sure that your pool chemistry is properly balanced at all times. A pool water testing kit can provide you with the information that you need to achieve the right mixture of pool chemicals. Adding too many chemicals could make your pool water unpleasant for swimming and recreation.
Just as you should remain vigilant to kids being around your pool, you should enforce the same rules around a hot tub installation near Salt Lake City . Safety rules around swimming pools and hot tubs are necessary to keep all kids and swimmers safe while still having fun. Let’s take a closer look at which rules should be enforced around your pool and hot tub installations.
To keep your kids, pets, and other people safe around your pool and hot tub, install a security fence around the area. Most cities require some sort of fence or border around hot tubs and pools. These can prevent young children from wandering into a hot tub unsupervised. You can also install various monitors—such as a fence monitor or a water motion sensor—which will inform you every time someone goes in or out of the hot tub. If you have a pool slide, usually complete with a ladder, make sure your kids and their friends are big enough to climb it safely and will not fall off. These are some simple ways to keep kids safe around your pool and hot tub.
- Hot Tub Installation
- Swimming Pool Installations
- Swimming Pool Design
- In Ground Pools
- Swimming Pool Maintenance
- Swimming Pool Service
- Swimming Pool Repair
- Outdoor Fireplace
- Outdoor Fire Pit
- Pool Safety
- Deep Blue Pools and Spas
- Outdoor Kitchen
- Pool Chemicals
- Chlorine Levels
- Water Feature
- Burning Calories
- Pool Contractor